DEWATERING & PELLET DRYER
PELLET PROCESSING SYSTEM FOR THE PLASTICS INDUSTRY
WEILIANG WLG Dryer Machine separates pelletized products from water slurries in a continuous operation. The whole drying process takes only a few seconds, the final material will be discharged quickly, and the surface moisture content of the EPS pellects after dried is as low as 0.05%. WLG Dryer Machine protects against product contamination, reduces maintenance intervals, and maximizes dryer output. Final drying is accomplished by spinning off the moisture through the centrifugal action of the vertical rotor located in the center of the dryer.
The rotor consists of impeller blades extending from the bottom to the top of the WLG Dryer. As the water is removed, pellets are carried to the top by the rotating blades. Our tubular solid rotor design and solid casing (screen) selection allows the dryer to control the counter- current air flow through the pellets with none of it passing into the rotor and bypassing the pellets. This significantly improves the efficiency of pellets dryness. Solid casings are installed near the top of the rotor to increase the air contact time. The product is then discharged at the top.
WEILIANG WLG Dryer Machine mainly used in the plastics industry, such as the dewatering and drying of EPS，LDPE, HDPE, LLDPE, ABS, PVC, PE, PP, PS, PA etc…
| Model | Granulator production rates (kg/hr) | Water usage (m/hr) | Power (KW) | Air flow (m/hr) | Screen area （㎡） |
|---|---|---|---|---|---|
| D532 | 25000 | 45 | 15 | 8100 | 12.63 |
| D650 | 44000 | 68 | 22 | 15300 | 16.26 |
| D850 | 60000 | 90 | 30 | 20000 | 18.61 |
| D1050 | 72000 | 114 | 37 | 24700 | 20.96 |
Even though you already had a plan, we may could be your plan B. Why not leave us your contacts here for the future possibility between us?
